Search and find Energies

Let us start with the room where you are in now and test if there is a disturbing electro magnetic energy anywhere in the room.

You are searching for disturbing energies coming from your radio or television set, cable entrances, cable computer, video recorder, halogen lamp, electricity meter and other equipment that is connected with the electrical grid but not the wireless devices that emanate pulsating energy like Dect phones.

There are two ways to test normal electrical energies:

Test One (global check of the room):

• Take your dowsing instrument.
• Go to the middle of the room. Concentrate.
• From this position look at your electrical appliances, one by one while asking: ”Is that appliance free from disturbing electrical radiation?” (Yes/No). 
• Ask a counter question such as: “Is there a disturbing energy coming from that appliance?” (Yes/No). 
• If you get a “No” to the first question and a “Yes” to the second one go to that appliance and check if you have put Bioform 9 on the electrical plug already, have put Bioforms on or near the appliance itself (if necessary) and on the transmitter, if any (Bioform 1 & 6). See: Searching for a suitable Bioform combination.
• If you have forgotten about this, do it now and check the appliance itself (see: Test Two). 
• If all is O.K. go back to the middle of the room and continue with the next appliance and your questions.

Test Two: test of the specific appliance:

• Take your dowsing instrument.
• Go to the electrical appliance of which you want to investigate the energy.
• Hold the loop of a guitar/violin string (or the tips of the parallel-stretched dowsing rods) near the appliance/electrical plug/transmitter at about a 10 cm distance.
• Ask: “Is there a disturbing energy here?”  (Yes/No). 
• Ask the counter question: “Is this free from disturbing energy?” (Yes/No).
• If necessary take measures as mentioned below.

Searching for a suitable Bioform combination:

To neutralize radiation coming from an electrical device you need one of the following combinations of Bioforms. Which combinations of Bioforms you need you will have to test yourself.

(You need other combinations to neutralize pulsating electro magnetic radiation, for instance radiation coming from DECT phones. See: Biotensorcourse Part Two).

Look at the pictures one by one and ask:

"Will this combination neutralize radiation coming from the TV/infrared remote control/portable set of analogue wireless phones and so on?" (Yes/No).

When you get a "Yes" ask the counter question:

"Is another Bioform combination better to use?" (Yes/No).

Now you need to know if you have to scratch the chosen combination into the housing of the appliance (Yes/No).

If you get a "Yes" ask where the best place is to do that: "On the left side - on the right side - on the back - on the front?" (Yes/No).

Scratch the Bioform(s) in the housing.

It is possible that you need to attach the chosen Bioforms to a card.

If the answer to your question about scratching the Forms was a: "No" you can ask:
"Do I need a card with that combination?" (Yes/No).
If you get a "Yes" search for the right distance and place for the self made card as described in The Art of Questioning/Searching for suitable Bioforms.

More information about making Bioforms out of electrical wire is in our manual: "Bioforms and their influence on electro magnetic radiation".
That manual describes which (combinations of) Bioform(s) you need to neutralize which kind of disturbing radiation as well.

• Check the result of your steps by repeating the former questions.

When you have become accustomed to working like this for some time, you will become aware that your dowsing instrument starts giving you information in a variety of ways.

Sometimes the parts of the loop separate in a very suable way to say: “yes”. Sometimes the two parts of the loop burst open in a loud: “YES”. Or, when you use dowsing rods: the rods are hesitant in a crossing to signify: “yes” or flip firmly to the crossing position, showing a loud: “YES”.

This signifies that in that spot there is only a tiny bit of disturbing energy (“yes”) or a lot of disturbances: (“YES”).

In the last case the range of the energy radiation itself will be larger that in the first case.

You can find out how large when you ask: “How far does the radiation reach?” and you move the open loop of the dowsing string away from the appliance slowly. When the loop springs back to the “No” position you know how far the (disturbing) radiation reaches.

If you use dowsing rods, they are in a crossing position first (“Yes”), when you move them away from the appliance. The rods will move to the straight position at the point of “No” radiation.

You can measure the radiation of beneficial energies in the same way of course!

This can be very helpful when you want to work with Feng Shui for instance.

The differentiated “yes” of “YES” answers of your dowsing instrument can be useful too while searching for geopathic disturbances (from energy spots as well as distorted water streams).

This is because it is important to know exactly where the middle of the disturbing energy is. At its center the disturbing energy is the most powerful and harmful and this is the place that needs to be harmonized. The rest of the geopathic spot or the distorted water stream becomes O.K. again as well.

When you are used to working with a pendulum or with kinesiology it is also possible to get the “yes” or “YES” information from your pendulum or the kinesiology test, but not as easy as you can get when using a dowsing instrument, especially the dowsing string loop.

Because of that the string is my favorite instrument by far!